View ZL60214BADA_4126210.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

ZL60214 Video IP Surveillance 10/100 Mbps Control Room 14-Port UTP-to-Fiber Converter
Data Sheet
November 2007
Ordering Information ZL60214BADA, 14 UTP-to-fiber converter in 19" 1u Rack
0C to +40C The part is compliant to the EU directive 2002/95/EC issued 27 January 2003 [RoHS]. A full "Data Sheet" is available to qualified customers. To register, please send an email to bertil.kronlund@zarlink.com.
Applications
* 10/100 Mbps extended LAN distances between: LAN and local IP surveillance cameras LAN and local access points for wireless IP cameras Remote switches and IP cameras Remote switches and access points for IP cameras
Features
* * * * * * Full duplex communication over single stranded multi-mode fiber Transmission distance: Ethernet up to 100 m, multi-mode fiber up to 2 km Compact size: 14-ports in 19" 1u rack Power 100-230V AC One single ST Fiber connector per 100Base-FX fiber cable TX: 850 nm, RX: 1300 nm
Note: The module should be used together with ZL60239 or ZL60240 for link operation.
Figure 1 - Typical Video IP Surveillance Solution 1
Zarlink Semiconductor Inc. Zarlink, ZL and the Zarlink Semiconductor logo are trademarks of Zarlink Semiconductor Inc. Copyright 2007, Zarlink Semiconductor Inc. All Rights Reserved.
ZL60214
Description
Data Sheet
The ZL60214 video IP surveillance camera cable extender module is a fully integrated device designed for direct connection between two types of media, 10/100Base-TX (Fast Ethernet on shielded/unshielded twisted pair copper cables (STP/UTP) and 100Base-FX (Fast Ethernet on multi-mode fiber) with single fiber, to extend the network reach up to 2 km. The Link is based on Zarlink's world class family of high-performance LEDs, VCSELs and PINs and have been optimized to offer excellent optical coupling efficiency in combination with high bandwidth operation and extremely good reliability. The optical part of the modules uses dichronic beamsplitters for maximum optical power budget and minimum crosstalk. Minimum internal crosstalk is achieved by the use of wavelength-selective detectors. The Modules is designed for multi-mode fiber and optimized for 62.5/125 m fiber. The link offers attractive advantages in terms of weight and flexibility that allows the device to be attached directly to the copper cable and fit inside the outdoor protective housing for the IP camera. Power supply of 100 to 230 V AC. The part is compliant to the EU directive 2002/95/EC issued 27 January 2003 [RoHS] with exception number 6.
2
Zarlink Semiconductor Inc.
For more information about all Zarlink products visit our Web Site at
www.zarlink.com
Information relating to products and services furnished herein by Zarlink Semiconductor Inc. or its subsidiaries (collectively "Zarlink") is believed to be reliable. However, Zarlink assumes no liability for errors that may appear in this publication, or for liability otherwise arising from the application or use of any such information, product or service or for any infringement of patents or other intellectual property rights owned by third parties which may result from such application or use. Neither the supply of such information or purchase of product or service conveys any license, either express or implied, under patents or other intellectual property rights owned by Zarlink or licensed from third parties by Zarlink, whatsoever. Purchasers of products are also hereby notified that the use of product in certain ways or in combination with Zarlink, or non-Zarlink furnished goods or services may infringe patents or other intellectual property rights owned by Zarlink. This publication is issued to provide information only and (unless agreed by Zarlink in writing) may not be used, applied or reproduced for any purpose nor form part of any order or contract nor to be regarded as a representation relating to the products or services concerned. The products, their specifications, services and other information appearing in this publication are subject to change by Zarlink without notice. No warranty or guarantee express or implied is made regarding the capability, performance or suitability of any product or service. Information concerning possible methods of use is provided as a guide only and does not constitute any guarantee that such methods of use will be satisfactory in a specific piece of equipment. It is the user's responsibility to fully determine the performance and suitability of any equipment using such information and to ensure that any publication or data used is up to date and has not been superseded. Manufacturing does not necessarily include testing of all functions or parameters. These products are not suitable for use in any medical products whose failure to perform may result in significant injury or death to the user. All products and materials are sold and services provided subject to Zarlink's conditions of sale which are available on request.
Purchase of Zarlink's I2C components conveys a licence under the Philips I2C Patent rights to use these components in and I2C System, provided that the system conforms to the I2C Standard Specification as defined by Philips. Zarlink, ZL and the Zarlink Semiconductor logo are trademarks of Zarlink Semiconductor Inc. Copyright Zarlink Semiconductor Inc. All Rights Reserved.
TECHNICAL DOCUMENTATION - NOT FOR RESALE

▲Up To Search▲

Price & Availability of ZL60214BADA

	To Download ZL60214BADA Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .